ØHigh selectivity, can measure two Infrared channel components
ØWall mounting type at the scene(IP65)和rack mount type in the indoor(IP20)
ØRealize air tightness isolation between circuit section and analysis section in wall mounting type
ØWall mounting type was used for zones 1 and 2, according to ATEX 2G and ATEX 3G or FM/CSA Class I, Div. 2
ØHeating type analyzer, internal temperature of analysis section is 65℃
ØSIL2 (Safety integrity Level)Safety integrity level certification
ØAnalog Output: 0/2/4mA,Active,Load Resistor≤750Ω
ØWarm-up Time: 30min; The maximal measurement accuracy can be achieved after 2h.
ØPreheating Temperature:Exceed the room temperature,at least 35℃
ØSample Gas Flow: 18 ~ 60 l/h (0.3 ~ 1.0 l/min)
ØSample Gas Temperatuer: 0 ~ 50℃
ØSample Gashumidity: <90%RH,no condensate
ØWorking Temperature: 5 ~ 45℃
ØWorking Humidty: <90%RH
ØWorking Pressure: 800 ~ 1200hPa (11 ~ 17psi)